PILLOWS & CUSHIONS · BED WEDGE & SUPPORT PILLOWS
Queen size · 59"W × 8"D × 21"H · Fiber foam fill · Ribbed soft velvet cover · Smooth metal zipper · 2 side storage pockets · 2 removable headrests · Detachable washable cover · Grey · 13 lbs · Vacuum compressed — 24–48 hours to expand · $58.34
Quick Answer: A 59"W × 8"D × 21"H Queen size wedge headboard pillow in grey — fiber foam fill, ribbed soft velvet cover with smooth metal zipper, 2 built-in side storage pockets, and 2 removable headrests that detach for individual use. Detachable washable cover. 13 lbs. Vacuum compressed on arrival — allow 24–48 hours to fully expand. Use for reading, working, gaming, resting in bed, or leg elevation on the floor. $58.34.
Most beds are designed for sleeping, not for everything else you do in bed — reading before sleep, working on a laptop, watching a series, recovering from an illness, or spending a Saturday morning in no particular hurry. Without proper back support, all of those activities end the same way: neck stiffness, lower back strain, and a pile of regular pillows that have migrated to unhelpful positions before the hour is up.
This wedge headboard pillow solves that problem directly. At 59" wide it spans the full width of a Queen mattress — a proper headboard equivalent in fiber foam and ribbed soft velvet, with two side storage pockets and two removable headrests. For beds without a headboard, this is the seated-in-bed experience the frame can't otherwise provide.
| Measurement | Imperial | Metric |
|---|---|---|
| Width | 59" | 1510 mm |
| Depth | 8" | 205 mm |
| Height | 21" | 530 mm |
| Weight | 13 lbs | 6 kg |
| Fits | Queen size beds (60" wide) — 59" width spans full mattress width | |
💡 At 59" wide this pillow spans the full width of a Queen mattress (60"), sitting correctly from edge to edge and functioning as a complete headboard replacement.
1. Fiber Foam Fill — Structured Support That Holds the Wedge Angle.
The fiber foam fill provides firm, structured back support that maintains the wedge angle under sustained body weight — unlike a standard pillow propped against the headboard, which compresses flat and shifts position within minutes. Fiber foam holds its form through extended reading, working, or recovery sessions and returns to its original shape after each use. The 21" height creates the backrest angle that supports the lower back, mid back, and shoulders simultaneously.
2. Ribbed Soft Velvet Cover — Skin-Friendly, Detachable, Washable.
The ribbed velvet cover has a distinctive corduroy-like texture that's immediately soft against bare skin and arms. The smooth metal zipper allows the cover to be removed completely and machine washed — critical for a pillow in daily skin contact for extended periods. The ribbed texture gives the pillow a premium, tactile surface appearance that reads as furniture-quality rather than simply functional.
3. Two Removable Headrests — Separable for Independent Use.
Two cylindrical headrests sit along the top edge of the wedge body, each detachable via its own smooth metal zipper. In position, they provide neck and head support at the correct height for the seated-in-bed posture the wedge creates. Detached, each headrest functions as an independent bolster or head pillow — useful for side sleepers, body support, or repositioning for different uses. Each headrest cover also washes separately.
4. Two Side Storage Pockets — Glasses, Remotes, Phones, All Within Reach.
One deep storage pocket on each side of the pillow keeps everyday bedside items — glasses, TV remotes, smartphones, books, charging cables, medications — organised and within natural arm reach from the supported sitting position. No reaching to the nightstand, no items disappearing into the bedding. The pocket openings sit at the natural arm-drop position when seated against the pillow.
5. Multiple Use Positions — Not Just for Bed.
As shown in the product images, this pillow works in four distinct configurations: upright back support against a headboard for reading or working; back support without a headboard (standing on its own); leg elevation when placed flat on the floor with legs resting on the wedge surface; and face-down floor lounging with the wedge as a chest and chin rest for phone use. The 59"×21"×8" wedge shape serves all four configurations without modification.
| Position | Setup | Best For |
|---|---|---|
| Upright on bed | Against headboard or wall — sit with back against wedge, headrests at neck | Reading, working, gaming, watching — primary use position |
| Self-standing on bed | No headboard needed — wedge sits independently on mattress | Platform beds, low-profile frames, beds away from wall |
| Leg elevation on floor | Wedge flat on floor, legs resting elevated on the angled surface | Circulation support, recovery, relaxation — legs elevated above heart level |
| Face-down floor lounging | Lie face-down, chest and chin resting on the angled front face | Phone use, gaming, casual lounging — supported prone position |
Scenario 1: You spend long stretches in bed reading, working, or watching and regularly wake up stiff.
The stiffness comes from sitting unsupported — the neck cranes forward, the lower back rounds, and standard pillows compress and shift before the session is done. The 21"H fiber foam wedge puts the spine in a supported neutral angle and holds it there. The 8" deep base keeps the wedge stable on the mattress without sliding; the 59" width means both sides of the body are consistently supported rather than cantilevering off a smaller pillow.
Scenario 2: You have a bed without a headboard and want the comfort of sitting upright.
Platform beds, low-profile frames, and beds positioned away from walls don't give you anything structural to lean against. This wedge pillow is a self-contained headboard — 59" wide, 21" tall, with the structural firmness to stand independently on a mattress and provide genuine back support without needing a wall or frame behind it.
Scenario 3: Two people share a Queen bed and want independent headrests.
The two headrests sit along the 59" width — one naturally positioned for each person on a Queen bed. Each headrest detaches independently: one person can remove theirs without disturbing the other's. When detached, each becomes a separate bolster pillow. Combined with the edx dual zone electric heated blanket, this creates a complete independent-comfort setup for two people sharing a bed.
Scenario 4: You want a practical gift for someone in recovery, managing back pain, or on bed rest.
At $58.34, this is a genuinely practical recovery gift — the wedge angle reduces the physical discomfort of sustained bed rest, the side pockets keep medications and devices within arm's reach, the leg elevation position supports circulation, and the washable velvet cover stays hygienic through extended use. More immediately useful than flowers; longer lasting than most comfort gifts at this price.
This pillow ships vacuum compressed for compact packaging. It will arrive significantly smaller than its 59" finished size — this is completely normal.
| Type | Wedge headboard support pillow |
| Size | Queen — fits Queen size beds (60" wide) |
| Dimensions | 59"W × 8"D × 21"H (1510 × 205 × 530 mm) |
| Weight | 13 lbs / 6 kg |
| Fill | Fiber foam — structured, maintains wedge angle under sustained weight |
| Cover Material | Ribbed soft velvet — skin-friendly, detachable, machine washable |
| Cover Closure | Smooth metal zipper |
| Headrests | 2 — removable, metal zipper, usable as independent bolster pillows |
| Side Pockets | 2 — one each side, for glasses, remotes, phones, books, cables |
| Use Positions | Upright back support · Self-standing · Leg elevation · Floor lounging |
| Best For | Reading · Working · Gaming · Resting · Recovery · No-headboard beds |
| Colour | Grey |
| Machine Washable | ✅ Main cover + headrest covers — fiber foam body spot clean only |
| Shipping Format | Vacuum compressed — knead 5 min, allow 24–48 hours to fully expand |
| Model Number | SSYDZ-07 |
| Price | $58.34 |
| SKU | D0102X3QFSW |
How wide is this pillow and will it fit a Queen bed?
59" wide — designed specifically for Queen beds (60" wide). The 59" width spans nearly the full width of the mattress, sitting from edge to edge and functioning as a complete headboard-width back support. It will also work on Full beds (54" wide) with a small amount of overhang on each side.
Can the headrests be used separately as individual pillows?
Yes — both cylindrical headrests detach from the main wedge body via individual smooth metal zippers. Each can be used as an independent bolster or head pillow in any position. When attached, they provide neck and head support at the correct height for the seated-in-bed position. The covers on each headrest are also removable and machine washable independently.
What are the four ways to use this pillow?
Four confirmed use positions: (1) Upright back support on a bed against a headboard for reading, working, or gaming; (2) Self-standing on a bed without a headboard — the wedge is structurally stable enough to sit independently on a mattress; (3) Leg elevation — placed flat on the floor with legs resting elevated on the angled surface; (4) Face-down floor lounging — lie prone with chest and chin resting on the angled front face for phone use or casual lounging.
My pillow arrived very compressed and flat — is it defective?
No — it ships vacuum compressed for efficient packaging. Remove from the bag immediately, knead and shake for approximately 5 minutes to begin the fiber foam expansion, then allow 24–48 hours for the pillow to reach its full 59"×8"×21" dimensions and correct firmness. Using it before full expansion may affect how the support feels.
Can the cover be machine washed?
Yes — the main ribbed velvet cover unzips via smooth metal zipper and is machine washable. Both headrest covers also unzip and wash separately. The fiber foam body should not be machine washed — spot clean with a damp cloth and allow to fully air dry before replacing the cover. Washing all removable covers regularly keeps the pillow hygienic for ongoing daily skin contact.
Does this work on a bed without a headboard?
Yes — this is one of its strongest use cases. The 8" deep base gives the wedge enough stability to sit independently on a mattress without a wall or headboard behind it. Platform beds, low-profile frames, and beds positioned in the centre of a room all benefit from this self-standing capability.
What fits in the side pockets?
The two side pockets are sized for everyday items — reading glasses, TV remotes, smartphones, small tablets, paperback books, charging cables, and medications. One pocket on each side sits at natural arm-drop reach from the supported sitting position the wedge creates.
Part of the Pillows & Cushions collection at beddingandcomfort.com · Every Night Deserves a First Class Bed.